Siemens Deka 60lb Fuel Injectors (EV1)

                                            𝐘𝐄𝐒, 𝐖𝐄 𝐒𝐓𝐎𝐂𝐊 𝐓𝐇𝐄𝐌!!!!!!!

Upgrade your supercharged Ford Lightning or Harley Davidson with Siemens Deka 60lb fuel injectors—the quick and easy solution for maximizing performance. These EV1-compatible injectors deliver precise fuel atomization, ensuring optimal combustion and responsive throttle control. Perfect for engines demanding reliable fuel flow, they install seamlessly into existing systems. Experience the power boost your ride deserves without complicated modifications. Trust Siemens engineering for consistent performance and durability that matches your machine's intensity.

Siemens Deka fuel injectors enhance engine performance and running quality through an optimized spray pattern. These high flow fuel injectors utilize a true 30 degree spray pattern for improved mixture preparation.

These injectors flow 60 lbs./hr. at 43.5 PSI ( 3 BAR ) and up to 85 lbs./hr. at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drivability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.

The EV1 injector connector can be found on many older and late-model OEM applications such as the GM TBI, TPI, LT1, LT4, LS1, some LS2, some LS6 and most European applications. We also offer the same injector with the EV6 / USCAR connector as Part Number MOTR-04557. Buy only the injector with the connector you need and eliminate the need for in-line adapters or having to change the factory connectors!

Specifications:
Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb./hr. = 630 cc/min = 453 g/min
Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb./hr. = 900 cc/min = 648 g/min
Gain: 0.11ms/mg
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Connector: Maritimer EV1
Series: DEKA 4 ( DEKA IV )
Orifice Type: Multi-orifice
Spray Pattern: 30 Degree Spray Cone
Factory fitted with Viton upper and lower O-rings

EV1 Long (107961)